ci/175-deploy-on-merge
2
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 not
|
d6b3f9764f |
fix(e2e): bound the Playwright run and make a failed login say why (closes #161) (#165)
## What & why #161 is really two defects, and the second one is why the first was undiagnosable. **A wedged suite consumed the job, and took the post-mortem with it.** Nothing bounded the Playwright run, so CI stopped the job mid-suite — and `if: always()` does not survive that. Run 739's job metadata shows every step after the e2e as a **0-second failure** stamped at the kill: ``` 14 failure 09:48:17 -> 10:14:54 Self-service e2e (Playwright …) 15 failure 10:14:54 -> 10:14:54 verify-stack check summary ← if: always() 16 failure 10:14:54 -> 10:14:54 e2e spec summary ← if: always() 17 failure 10:14:54 -> 10:14:54 Dump container logs on failure ← if: failure() 18 failure 10:14:54 -> 10:14:54 Tear down ← if: always() ``` So the per-spec summary, the container-log dump and the teardown never ran, and the log lost whatever the killed process had buffered — leaving the single `✘` line the issue was filed from. `globalTimeout` now makes Playwright stop and *report*: the JSON report is written and those steps still get their turn. (A `timeout-minutes` on the job would have reproduced the same failure, so there isn't one.) The "~24-minute gap" is that kill, not necessarily a hang — note run 739 shows `run_attempt: 2`, and `concurrency.cancel-in-progress` kills an in-flight run on any re-run or push. **A login that never got its form ate the 90-second test timeout.** Playwright actions auto-wait until the *test* timeout, not `expect.timeout` — so a portal that serves its page but never bootstraps (its `config.json` fetch or the OIDC discovery behind `authorize()` failed; `main.ts` only `console.error`s) spent 90s to report `locator.fill: Test timeout of 90000ms exceeded`: the symptom, not the cause. That is catalogus.spec's 1.8 minutes. Both Keycloak forms are now asserted visible first, with a 20s budget and a message naming the step that never happened. Verified against a real blank-bootstrap portal — the beheer image served with a `config.json` that is not JSON — which fails in **20.2s** with *"the Keycloak login form never appeared — the portal did not reach Keycloak (check its config.json fetch and the OIDC discovery …)"*. **And the summary now says why.** The per-spec table (#136) rendered a verdict icon and nothing else, so even a surviving summary cost a log dive. Failing specs now carry their first error, flattened for a table cell (ANSI stripped, newlines collapsed, `|` escaped, clipped) — shape verified against a real @playwright/test 1.61 failing report, with a stdlib assert self-check on `make unit`. Closes #161 ## Definition of Done - [x] Linked Gitea issue (above). - [x] Failing test committed before the implementation. - [x] Implementation makes the test pass; refactor commit follows (login helper dedup). - [x] Conventional Commits referencing the issue (`refs #161`). - [ ] CI green — all Gitea Actions jobs. - [x] `docker compose up` from a fresh clone reaches green health checks within 3 minutes (untouched). - [x] Docs updated — `docs/runbooks/gitea-actions-gotchas.md` §9. - [x] ADR — not needed: no boundary, dependency or coupling rule touched (test/CI infra only). - [x] Demo note — not applicable: nothing user-visible. ## Notes for reviewers **What this does not do: identify why the beheerder login failed that once.** The evidence to do that was destroyed by defect 2, which is what this PR fixes. The suite ran green here five times today (catalogus.spec 1.1–5.3s each) — but a local box is not the loaded CI runner, so that is weak evidence and I am not claiming the flake is gone. What changes is that the next occurrence is bounded and self-describing: it fails in 20s naming the failing step, the JSON report survives, and the summary prints the error. Please keep #161 in mind rather than treating this as proof. **Two follow-ups I did not pull into this PR:** - *All four portals show a permanently blank page if their startup fetch fails* — `main.ts` does `fetch('config.json').then(bootstrap).catch(console.error)`, one shot, no UI and no recovery. That is a real product gap (the deliberately-broken portal above is exactly what a user would see) and wants its own slice, not a test-infra PR. - `retries: 1` is untouched. CLAUDE.md §15 says flaky tests are fixed rather than retried, but removing retries while a real flake is unexplained would trade a rare red for a frequent one. Worth revisiting once #161 recurs (or doesn't) with the new diagnostics. The login-helper rename (`medewerker-login.ts` → `keycloak-login.ts`, citizen logins routed through `loginBurger`) is its own no-behaviour-change commit: the three citizen specs each duplicated the same three-line login, so guarding the login path once meant routing them through it first.Reviewed-on: #165 |
||
|
not
|
fff88ca23d |
ci: richer step reports via Gitea 1.27 job summaries (closes #136) (#137)
## What & why Use the standard `$GITHUB_STEP_SUMMARY` (Gitea 1.27 + act_runner 2.0.0) to surface on the run page what was previously buried in logs or download-only artifacts. All five quick wins from #136, **reporting-only** — no job's pass/fail gating changes. Closes #136 ### Items 1. **Mutation scores** — added the `markdown` reporter to each `stryker-config.json`; the `mutation` job concatenates each service's `mutation-report.md` into the summary (`if: always()`). Also reveals where `make mutation` stopped on a ratchet break. 2. **Per-frontend tests** — the 4 apps' `test` targets emit vitest JSON to `test-output/{projectName}.json` (Nx token interpolation); `infra/vitest-summary.py` renders a per-frontend table. 3. **Per-service unit tests** — `make unit` now writes TRX; `infra/trx-summary.py` renders a per-service table (service name derived from the `services/<name>/` path, so `domain` shows, not `big.tests`). 4. **e2e per-spec results** — Playwright writes `playwright-report.json`; `run-e2e-check.sh` copies it out of the container (capturing the exit code first); `infra/playwright-summary.py` renders a per-spec table. Turns a red e2e into a one-glance "which spec". 5. **verify-stack check table** — each live-stack check has an `id`; a final `if: always()` step tabulates each check's ✅/❌/⏭️. Docs: `gitea-actions-gotchas.md` §8 (version requirement + `$GITHUB_STEP_SUMMARY` guard + step-level `always()` note). ### Notes - Every summary write is guarded with `[ -n "${GITHUB_STEP_SUMMARY:-}" ]`, so it no-ops on an unsupported runner / locally. - New helper scripts are stdlib-only Python, matching the existing `infra/*.py` check scripts (no new dependency — a few lines of parsing rather than a test-logger package). - `TestResults/` and `test-output/` gitignored. - This is also the first PR-run exercising the #135 verify-stack fix end to end. ## Verified locally `make unit` (TRX) ✓ · 4 apps' vitest JSON ✓ · ACL Stryker markdown report ✓ · all four parsers + the two summary shell blocks ✓ · `ci.yaml` + `run-e2e-check.sh` syntax ✓. The rendered summaries themselves only appear on the run page — this PR's CI run is the end-to-end check. ## Definition of Done - [x] Each item writes to `$GITHUB_STEP_SUMMARY` (guarded), renders on the run page. - [x] No change to any job's pass/fail gating. - [x] Conventional Commits referencing #136 (one per item + docs). - [ ] CI green; summaries visible on the run. - [x] Runbook note (gotchas §8). 🤖 Generated with [Claude Code](https://claude.com/claude-code)Reviewed-on: #137 |