feat(k8s): Helm chart for the whole stack on a single-node cluster (refs #25)

One chart whose values.yaml is a near-literal transcription of
infra/docker-compose.yml, rendered by three generic templates (Deployment, Job,
Service) over a `workloads` map — so the two stacks can be diffed by eye instead
of by archaeology, and adding a service is a values edit.

Platform-forced deviations, each commented where it appears:
- `args`, never `command`: compose replaces the image CMD, Kubernetes replaces the
  ENTRYPOINT. The chart fails to render on `command`, because the symptom (postgres
  refusing to run as root, Keycloak exec-ing `start-dev`) is nothing like the cause.
- The four Django services apply their own setup_configuration in the web pod
  rather than in a separate init Job: both scripts migrate, and without compose's
  depends_on they race the same database.
- OpenZaak and Objecten are addressed by service FQDN, because Django rejects a
  single-label host in a URL — the reason compose passes container IPs around.
- NodePorts, no ingress; databases are emptyDir until persistence.storageClass is
  set, so the stack comes up on a cluster with no CSI driver.

The upstream config inputs stay in the repo and become ConfigMaps via
infra/helm/seed-configmaps.sh — the Kubernetes sibling of infra/seed-config.sh —
so the compose stack and the chart cannot fork. infra/helm/registry.yaml runs an
in-cluster registry because Talos cannot side-load an image and a laptop-side one
needs a root-level firewall change.

Makefile

@@ -43,7 +43,7 @@ export DOCKER_HOST := unix://$(PODMAN_SOCK)
 endif
 endif
 
-.PHONY: ci lint build unit mutation frontend integration verify verify-up verify-acl verify-nrc verify-projection verify-bff verify-domain verify-observability verify-tracing verify-metrics verify-objecttypen verify-objecten verify-registerrecord verify-objecten-notifications verify-notifications smoke up down local verify-local local-down changelog openzaak-up openzaak-smoke openzaak-seed openzaak-down stack-up stack-smoke stack-down keycloak-up keycloak-smoke keycloak-down flowable-up flowable-smoke flowable-down k8s-lint help
+.PHONY: ci lint build unit mutation frontend integration verify verify-up verify-acl verify-nrc verify-projection verify-bff verify-domain verify-observability verify-tracing verify-metrics verify-objecttypen verify-objecten verify-registerrecord verify-objecten-notifications verify-notifications smoke up down local verify-local local-down changelog openzaak-up openzaak-smoke openzaak-seed openzaak-down stack-up stack-smoke stack-down keycloak-up keycloak-smoke keycloak-down flowable-up flowable-smoke flowable-down k8s-lint k8s-registry k8s-images k8s-seed k8s-up k8s-reseed k8s-portals k8s-down k8s-purge help
 
 ## ci: run the full pipeline — lint, build, unit, mutation, frontend, verify (mirrors Gitea Actions)
 ## `verify` is the live-stack stage (full stack up once → ACL + notification checks).
@@ -350,6 +350,71 @@ k8s-lint:
 	helm lint $(K8S_CHART)
 	helm template big $(K8S_CHART) -n $(K8S_NS) --set images.registry=registry.invalid:5000 >/dev/null
 
+## k8s-registry: deploy the in-cluster image registry (NodePort 30500)
+k8s-registry:
+	kubectl apply -f infra/helm/registry.yaml
+	kubectl -n registry rollout status deploy/registry --timeout=180s
+
+## k8s-images: build this repo's images (via compose) and push them to $(K8S_REGISTRY)
+# `docker save | crane push` rather than `docker push`: the registry speaks plain
+# HTTP, which the Docker daemon refuses without a root-level insecure-registries
+# entry, while crane just takes --insecure. Install: see docs/runbooks/kubernetes-talos.md.
+k8s-images:
+	@command -v crane >/dev/null || { echo "crane not found — see docs/runbooks/kubernetes-talos.md §0" >&2; exit 2; }
+	@test -n "$(K8S_REGISTRY)" || { echo "set K8S_REGISTRY=<registry host:port>" >&2; exit 2; }
+	docker compose -f $(COMPOSE) build $(K8S_IMAGES)
+	@tar=$$(mktemp -t rr-img-XXXX.tar); \
+	for i in $(K8S_IMAGES); do \
+	  docker save register-referentie/$$i:dev -o $$tar; \
+	  crane push --insecure $$tar $(K8S_REGISTRY)/register-referentie/$$i:dev; \
+	done; rm -f $$tar
+
+## k8s-seed: create the ConfigMaps the chart mounts (upstream config + bootstrap scripts)
+k8s-seed:
+	bash infra/helm/seed-configmaps.sh $(K8S_NS)
+
+## k8s-up: seed the config and install/upgrade the release
+k8s-up: k8s-seed
+	@test -n "$(TALOS_HOST)" || { echo "set TALOS_HOST=<node ip>" >&2; exit 2; }
+	@test -n "$(K8S_REGISTRY)" || { echo "set K8S_REGISTRY=<registry the node can pull from>" >&2; exit 2; }
+	helm upgrade --install big $(K8S_CHART) -n $(K8S_NS) --create-namespace \
+	  --set host=$(TALOS_HOST) --set images.registry=$(K8S_REGISTRY) $(K8S_SET)
+	kubectl -n $(K8S_NS) get pods
+
+## k8s-reseed: re-run the bootstrap jobs (after a database was wiped, or after
+## changing a Job in the chart — Job pod templates are immutable, so a plain
+## `helm upgrade` is rejected)
+k8s-reseed:
+	kubectl -n $(K8S_NS) delete job -l app.kubernetes.io/component=init --ignore-not-found
+	$(MAKE) k8s-up
+	# The projection's schema is created on service start (Projection.ReadModel migrates in a
+	# hosted service), so a wiped database also needs these two restarted — otherwise they keep
+	# writing to a schema-less DB and fail with `relation "processed_notifications" does not exist`.
+	kubectl -n $(K8S_NS) rollout restart deploy/event-subscriber deploy/projection-api
+	kubectl -n $(K8S_NS) rollout status deploy/event-subscriber deploy/projection-api --timeout=180s
+
+## k8s-portals: forward the browser-facing services to localhost (Ctrl-C stops them all)
+# The portals' OIDC flow needs a *secure context* for crypto.subtle (PKCE), and browsers
+# only grant that to https or localhost — a NodePort on the VM's IP is neither. Forwarding
+# to localhost on the same port numbers keeps Keycloak's pinned issuer valid. Deploy with
+# TALOS_HOST=localhost for this to line up.
+k8s-portals:
+	@echo "self-service http://localhost:30140 · openbaar :30141 · behandel :30142 · beheer :30143 · keycloak :30180"
+	@trap 'kill 0' INT TERM; \
+	for f in self-service:30140:80 openbaar:30141:80 behandel:30142:80 beheer:30143:80 keycloak:30180:8080; do \
+	  svc=$${f%%:*}; rest=$${f#*:}; lport=$${rest%%:*}; rport=$${rest#*:}; \
+	  kubectl -n $(K8S_NS) port-forward --address 127.0.0.1 svc/$$svc $$lport:$$rport >/dev/null & \
+	done; wait
+
+## k8s-down: uninstall the release (database PVCs are kept)
+k8s-down:
+	helm uninstall big -n $(K8S_NS)
+
+## k8s-purge: uninstall AND drop the namespace, including the database volumes
+k8s-purge:
+	-helm uninstall big -n $(K8S_NS)
+	kubectl delete namespace $(K8S_NS) --ignore-not-found
+
 ## help: list available targets
 help:
 	@grep -E '^## ' $(MAKEFILE_LIST) | sed 's/^## //'

infra/helm/big-reference/Chart.yaml

@@ -0,0 +1,8 @@
+apiVersion: v2
+name: big-reference
+description: >-
+  The BIG reference stack (Common Ground) on Kubernetes — a port of
+  infra/docker-compose.yml, aimed at a single-node Talos cluster.
+type: application
+version: 0.1.0
+appVersion: dev

infra/helm/big-reference/templates/NOTES.txt

@@ -0,0 +1,25 @@
+{{ .Chart.Name }} {{ .Chart.Version }} deployed to namespace {{ .Release.Namespace }}.
+
+Watch it converge (the upstream Django services migrate on first boot, so the
+first bring-up takes a few minutes):
+
+  kubectl -n {{ .Release.Namespace }} get pods -w
+  kubectl -n {{ .Release.Namespace }} get jobs
+
+Every bootstrap Job must reach Completions 1/1:
+{{- range $name, $w := .Values.workloads }}
+{{- if and (ne $w.enabled false) $w.job }}
+  - {{ $name }}
+{{- end }}
+{{- end }}
+
+Open in a browser (add {{ .Values.host }} to /etc/hosts if you use a name):
+{{- range $name, $port := .Values.nodePorts }}
+{{- $w := index $.Values.workloads $name }}
+{{- if ne $w.enabled false }}
+  {{ printf "%-16s http://%s:%v" $name $.Values.host $port }}
+{{- end }}
+{{- end }}
+
+Test users are in docs/synthetic-data.md. If a pod is stuck in
+ContainerCreating on a missing ConfigMap, run: make k8s-seed

infra/helm/big-reference/templates/_helpers.tpl

@@ -0,0 +1,142 @@
+{{/*
+One pod spec for every workload, Deployment and Job alike. The chart is
+values-driven on purpose: `.Values.workloads` is a near-literal transcription of
+infra/docker-compose.yml, so the two stacks can be diffed by eye instead of by
+archaeology. Adding a service is a values edit, not a template edit.
+
+Called as: include "big.podspec" (dict "root" $ "name" $name "w" $w)
+*/}}
+{{- define "big.podspec" -}}
+{{- $root := .root -}}
+{{- $name := .name -}}
+{{- $w := .w -}}
+{{- with $root.Values.imagePullSecrets }}
+imagePullSecrets:
+{{- toYaml . | nindent 2 }}
+{{- end }}
+{{- with $w.waitFor }}
+initContainers:
+  - name: wait-for-deps
+    image: {{ $root.Values.images.busybox }}
+    command:
+      - sh
+      - -c
+      - |
+        for t in {{ join " " . }}; do
+          echo "waiting for $t"
+          until nc -z "${t%:*}" "${t#*:}"; do sleep 2; done
+        done
+{{- end }}
+containers:
+  - name: {{ $name }}
+    image: {{ include "big.image" (dict "root" $root "name" $name "w" $w) }}
+    # Only this repo's images get the configured policy: their `dev` tag is mutable.
+    # Upstream tags are pinned, so IfNotPresent keeps them out of pod-template diffs —
+    # which matters because a changed template makes a Job unpatchable (immutable).
+    imagePullPolicy: {{ if $w.own }}{{ $root.Values.images.pullPolicy }}{{ else }}IfNotPresent{{ end }}
+    {{- if $w.command }}
+    {{- fail (printf "workload %s: use `args`, not `command` — compose's `command:` replaces CMD, but Kubernetes' `command:` replaces the image ENTRYPOINT (postgres would run as root, keycloak would exec `start-dev`)" $name) }}
+    {{- end }}
+    {{- with $w.args }}
+    args:
+{{- toYaml . | nindent 6 }}
+    {{- end }}
+    {{- with $w.envFrom }}
+    envFrom:
+    {{- range . }}
+      - configMapRef:
+          # optional: an env group whose feature is disabled (e.g. otel) simply
+          # isn't rendered, and the pod must still start.
+          name: {{ printf "%s-env" . }}
+          optional: true
+    {{- end }}
+    {{- end }}
+    {{- with $w.env }}
+    env:
+{{- include "big.env" (list $root .) | nindent 6 }}
+    {{- end }}
+    {{- with $w.ports }}
+    ports:
+    {{- range . }}
+      - name: {{ .name }}
+        containerPort: {{ .targetPort | default .port }}
+    {{- end }}
+    {{- end }}
+    {{- with $w.probe }}
+    readinessProbe:
+{{- toYaml . | nindent 6 }}
+    {{- end }}
+    {{- with $w.resources }}
+    resources:
+{{- toYaml . | nindent 6 }}
+    {{- end }}
+    {{- if or $w.files $w.data }}
+    volumeMounts:
+    {{- range $w.files }}
+      - name: {{ .configMap }}
+        mountPath: {{ .mountPath }}
+        {{- with .subPath }}
+        subPath: {{ . }}
+        {{- end }}
+        readOnly: true
+    {{- end }}
+    {{- with $w.data }}
+      - name: data
+        mountPath: {{ .mountPath }}
+    {{- end }}
+    {{- end }}
+{{- if or $w.files $w.data }}
+volumes:
+{{- range $w.files }}
+  - name: {{ .configMap }}
+    configMap:
+      name: {{ .configMap }}
+      {{- with .defaultMode }}
+      defaultMode: {{ . }}
+      {{- end }}
+{{- end }}
+{{- with $w.data }}
+  - name: data
+    {{- if $root.Values.persistence.storageClass }}
+    persistentVolumeClaim:
+      claimName: {{ $name }}-data
+    {{- else }}
+    # No StorageClass configured: the databases are emptyDir, so the stack needs
+    # no CSI driver to come up. Data then lives as long as the pod does — see
+    # docs/runbooks/kubernetes-talos.md for switching on local-path.
+    emptyDir: {}
+    {{- end }}
+{{- end }}
+{{- end }}
+{{- end -}}
+
+{{/* Image ref: `own: true` workloads are built from this repo, everything else is upstream. */}}
+{{- define "big.image" -}}
+{{- $root := .root -}}
+{{- $w := .w -}}
+{{- if $w.own -}}
+{{- $ref := printf "%s/%s:%s" $root.Values.images.repositoryPrefix .name $root.Values.images.tag -}}
+{{- with $root.Values.images.registry }}{{ printf "%s/%s" . $ref }}{{ else }}{{ $ref }}{{ end }}
+{{- else -}}
+{{- $w.image -}}
+{{- end -}}
+{{- end -}}
+
+{{/*
+Env list from a map. Every value is run through `tpl`, so values.yaml can name
+cluster-internal hosts ({{ .Release.Namespace }}) and the node address
+({{ .Values.host }}) without the chart hard-coding either.
+*/}}
+{{- define "big.env" -}}
+{{- $root := index . 0 -}}
+{{- range $k, $v := index . 1 }}
+- name: {{ $k }}
+  value: {{ tpl (toString $v) $root | quote }}
+{{- end }}
+{{- end -}}
+
+{{- define "big.labels" -}}
+app.kubernetes.io/name: {{ .name }}
+app.kubernetes.io/instance: {{ .root.Release.Name }}
+app.kubernetes.io/managed-by: Helm
+{{- end -}}

infra/helm/big-reference/templates/config.yaml

@@ -0,0 +1,44 @@
+{{- /*
+Shared env blocks — the Kubernetes equivalent of the YAML anchors in
+infra/docker-compose.yml (&oz-env, &nrc-env, &objecttypen-env, &objecten-env).
+A workload picks them up with `envFrom`, so the web/celery/init variants of an
+upstream image stay guaranteed-identical, and `kubectl get cm oz-env -o yaml`
+shows what a pod actually got.
+
+The *file* inputs (setup_configuration data.yaml, Keycloak realms, BPMN/DMN, the
+seed scripts) are NOT here: they live in the repo and are turned into ConfigMaps
+by infra/helm/seed-configmaps.sh, exactly as infra/seed-config.sh streams them
+into the compose config volumes. Copying them into the chart would fork them.
+*/ -}}
+{{- range $group, $env := .Values.envGroups }}
+---
+apiVersion: v1
+kind: ConfigMap
+metadata:
+  name: {{ $group }}-env
+  labels:
+{{- include "big.labels" (dict "root" $ "name" (printf "%s-env" $group)) | nindent 4 }}
+data:
+{{- range $k, $v := $env }}
+  {{ $k }}: {{ tpl (toString $v) $ | quote }}
+{{- end }}
+{{- end }}
+{{- /*
+Portal OIDC config. The images bake config.json with the compose authority
+(keycloak:8080), which a browser outside the cluster cannot resolve; these
+ConfigMaps mount over it with the node address Keycloak's issuer is pinned to
+(KC_HOSTNAME below), so the token the browser gets and the issuer the BFF
+discovers are the same string. Same mechanism as infra/host-browser.yml.
+*/ -}}
+{{- range $realm := list "digid" "medewerker" }}
+---
+apiVersion: v1
+kind: ConfigMap
+metadata:
+  name: portal-config-{{ $realm }}
+  labels:
+{{- include "big.labels" (dict "root" $ "name" (printf "portal-config-%s" $realm)) | nindent 4 }}
+data:
+  config.json: |
+    { "authority": "{{ printf "http://%s:%v" $.Values.host (index $.Values.nodePorts "keycloak") }}/realms/{{ $realm }}" }
+{{- end }}

infra/helm/big-reference/templates/deployments.yaml

@@ -0,0 +1,39 @@
+{{- range $name, $w := .Values.workloads }}
+{{- if and (ne $w.enabled false) (not $w.job) }}
+---
+apiVersion: apps/v1
+kind: Deployment
+metadata:
+  name: {{ $name }}
+  labels:
+{{- include "big.labels" (dict "root" $ "name" $name) | nindent 4 }}
+spec:
+  replicas: 1
+  # Recreate, not RollingUpdate: single node, ReadWriteOnce volumes, and nothing
+  # here is HA — a second pod would just fight the first for the disk.
+  strategy:
+    type: Recreate
+  selector:
+    matchLabels:
+      app.kubernetes.io/name: {{ $name }}
+      app.kubernetes.io/instance: {{ $.Release.Name }}
+  template:
+    metadata:
+      {{- /*
+        A ConfigMap mounted with subPath never picks up updates, so a portal whose
+        config.json content changed has to be rolled. Hashing only the values that
+        render it keeps the churn off the databases — an emptyDir database that is
+        recreated for no reason loses its data (see the runbook §6).
+      */}}
+      {{- range $w.files }}
+      {{- if hasPrefix "portal-config-" .configMap }}
+      annotations:
+        checksum/portal-config: {{ printf "%s|%v" $.Values.host (index $.Values.nodePorts "keycloak") | sha256sum }}
+      {{- end }}
+      {{- end }}
+      labels:
+{{- include "big.labels" (dict "root" $ "name" $name) | nindent 8 }}
+    spec:
+{{- include "big.podspec" (dict "root" $ "name" $name "w" $w) | nindent 6 }}
+{{- end }}
+{{- end }}

infra/helm/big-reference/templates/jobs.yaml

@@ -0,0 +1,29 @@
+{{- /*
+The one-shot bootstrap containers from compose (oz-init, nrc-init, flowable-init,
+the *-init setup_configuration runs, the zaaktype seed and the NRC abonnement)
+become Jobs. All of them are idempotent, so ordering is not enforced with hooks:
+each waits for the ports it needs (waitFor) and Kubernetes retries the rest.
+A wiped database is re-seeded by `make k8s-reseed`.
+*/ -}}
+{{- range $name, $w := .Values.workloads }}
+{{- if and (ne $w.enabled false) $w.job }}
+---
+apiVersion: batch/v1
+kind: Job
+metadata:
+  name: {{ $name }}
+  labels:
+{{- include "big.labels" (dict "root" $ "name" $name) | nindent 4 }}
+    app.kubernetes.io/component: init
+spec:
+  backoffLimit: 20
+  template:
+    metadata:
+      labels:
+{{- include "big.labels" (dict "root" $ "name" $name) | nindent 8 }}
+        app.kubernetes.io/component: init
+    spec:
+      restartPolicy: OnFailure
+{{- include "big.podspec" (dict "root" $ "name" $name "w" $w) | nindent 6 }}
+{{- end }}
+{{- end }}

infra/helm/big-reference/templates/pvcs.yaml

@@ -0,0 +1,22 @@
+{{- if .Values.persistence.storageClass }}
+{{- range $name, $w := .Values.workloads }}
+{{- if and (ne $w.enabled false) $w.data }}
+---
+apiVersion: v1
+kind: PersistentVolumeClaim
+metadata:
+  name: {{ $name }}-data
+  labels:
+{{- include "big.labels" (dict "root" $ "name" $name) | nindent 4 }}
+  # Keep the databases when the release is uninstalled; `make k8s-purge` drops them.
+  annotations:
+    helm.sh/resource-policy: keep
+spec:
+  accessModes: [ReadWriteOnce]
+  storageClassName: {{ $.Values.persistence.storageClass }}
+  resources:
+    requests:
+      storage: {{ $w.data.size | default "2Gi" }}
+{{- end }}
+{{- end }}
+{{- end }}

infra/helm/big-reference/templates/services.yaml

@@ -0,0 +1,35 @@
+{{- /*
+Service names are the compose service names, verbatim: the portals' Caddy
+proxies to http://bff:8080 and the upstream setup_configuration files name
+http://openzaak:8000 / http://nrc-web:8000, so in-cluster DNS has to answer to
+exactly those names. Do not rename a workload without checking both.
+
+.Values.nodePorts is the single place a port is published outside the cluster;
+a workload listed there gets a NodePort on its first (only) port.
+*/ -}}
+{{- range $name, $w := .Values.workloads }}
+{{- if and (ne $w.enabled false) $w.ports }}
+{{- $nodePort := index $.Values.nodePorts $name }}
+---
+apiVersion: v1
+kind: Service
+metadata:
+  name: {{ $name }}
+  labels:
+{{- include "big.labels" (dict "root" $ "name" $name) | nindent 4 }}
+spec:
+  type: {{ if $nodePort }}NodePort{{ else }}ClusterIP{{ end }}
+  selector:
+    app.kubernetes.io/name: {{ $name }}
+    app.kubernetes.io/instance: {{ $.Release.Name }}
+  ports:
+  {{- range $i, $p := $w.ports }}
+    - name: {{ $p.name }}
+      port: {{ $p.port }}
+      targetPort: {{ $p.targetPort | default $p.port }}
+      {{- if and $nodePort (eq $i 0) }}
+      nodePort: {{ $nodePort }}
+      {{- end }}
+  {{- end }}
+{{- end }}
+{{- end }}

infra/helm/big-reference/values.yaml

@@ -0,0 +1,608 @@
+# Values for the BIG reference stack on Kubernetes.
+#
+# `workloads` is a near-literal transcription of infra/docker-compose.yml — same
+# service names, same images, same env, same one-shots — so the two stacks can be
+# diffed by eye. Read that file's comments for the *why* behind each setting; only
+# the deviations forced by Kubernetes are re-explained here.
+#
+# Every env value is rendered with Helm's `tpl`, so it may use:
+#   {{ .Release.Namespace }}  — for a cluster-internal FQDN
+#   {{ .Values.host }}        — the node address a browser reaches the cluster on
+#
+# Deviations from compose, all of them consequences of the platform:
+#   * The compose stack hands the ACL and the seeds OpenZaak's *container IP*,
+#     because OpenZaak and NRC validate URLs with Django's URLValidator and a
+#     single-label host ("openzaak") is rejected. In Kubernetes the service FQDN
+#     (openzaak.<ns>.svc.cluster.local) is already multi-label, so the IP dance and
+#     the `objecten.local` network alias both disappear.
+#   * `depends_on: service_healthy` becomes a `waitFor` init container (TCP wait)
+#     plus readiness probes. Ordering is otherwise not enforced: every bootstrap
+#     job is idempotent and Kubernetes retries.
+#   * The published ports are NodePorts (see `nodePorts`), not host ports.
+
+# The address a browser outside the cluster uses to reach the node: your Talos
+# VM's IP. It pins Keycloak's issuer and the portals' OIDC authority to one
+# string, so browser tokens and the BFF's discovered issuer agree.
+host: 192.168.122.100
+
+# Set when pulling from a private registry (e.g. the Gitea Container Registry).
+imagePullSecrets: []
+
+images:
+  # Where the images built from THIS repo live. Empty = the bare
+  # `register-referentie/<svc>:dev` names, which only works if the node already
+  # has them. On Talos it never does — point this at a registry the node can
+  # reach (see docs/runbooks/kubernetes-talos.md).
+  registry: ""
+  repositoryPrefix: register-referentie
+  tag: dev
+  # Applies to this repo's images only (see _helpers.tpl). Always, because `dev`
+  # is a mutable tag: with IfNotPresent the node keeps the first image it pulled
+  # and `make k8s-images` would appear to do nothing. The registry is in-cluster,
+  # so a re-pull is local and cheap — but the pods do depend on it being up.
+  pullPolicy: Always
+  busybox: docker.io/library/busybox:stable
+
+persistence:
+  # Empty = every database is an emptyDir, so the stack comes up on a bare
+  # cluster with no CSI driver. Set to a StorageClass (e.g. `local-path`) to keep
+  # the data across pod restarts.
+  storageClass: ""
+
+# The only place a port is published outside the cluster. A workload listed here
+# gets a NodePort on its single port; everything else stays ClusterIP.
+nodePorts:
+  openzaak: 30000
+  nrc-web: 30001
+  objecttypen: 30020
+  objecten: 30021
+  bff: 30080
+  flowable-rest: 30090
+  self-service: 30140
+  openbaar: 30141
+  behandel: 30142
+  beheer: 30143
+  keycloak: 30180
+  grafana: 30300
+
+# ── Shared env blocks (the compose YAML anchors) ────────────────────────────────
+envGroups:
+
+  oz:
+    UWSGI_PROCESSES: "1"
+    UWSGI_THREADS: "2"
+    DJANGO_SETTINGS_MODULE: openzaak.conf.docker
+    SECRET_KEY: dev-only-not-for-production
+    DB_HOST: oz-db
+    DB_NAME: openzaak
+    DB_USER: openzaak
+    DB_PASSWORD: openzaak
+    IS_HTTPS: "no"
+    ALLOWED_HOSTS: "*"
+    CACHE_DEFAULT: oz-redis:6379/0
+    CACHE_AXES: oz-redis:6379/0
+    CELERY_BROKER_URL: redis://oz-redis:6379/1
+    CELERY_RESULT_BACKEND: redis://oz-redis:6379/1
+    DISABLE_2FA: "true"
+    NOTIFICATIONS_DISABLED: "false"
+    OPENZAAK_SUPERUSER_USERNAME: admin
+    DJANGO_SUPERUSER_PASSWORD: admin
+    OPENZAAK_SUPERUSER_EMAIL: admin@localhost
+    RUN_SETUP_CONFIG: "true"
+
+  nrc:
+    UWSGI_PROCESSES: "1"
+    UWSGI_THREADS: "2"
+    DJANGO_SETTINGS_MODULE: nrc.conf.docker
+    SECRET_KEY: dev-only-not-for-production
+    DB_HOST: nrc-db
+    DB_NAME: opennotificaties
+    DB_USER: opennotificaties
+    DB_PASSWORD: opennotificaties
+    IS_HTTPS: "no"
+    ALLOWED_HOSTS: "*"
+    CACHE_DEFAULT: nrc-redis:6379/0
+    CACHE_AXES: nrc-redis:6379/0
+    CELERY_BROKER_URL: redis://nrc-redis:6379/1
+    CELERY_RESULT_BACKEND: redis://nrc-redis:6379/1
+    DISABLE_2FA: "true"
+    OPENNOTIFICATIES_SUPERUSER_USERNAME: admin
+    DJANGO_SUPERUSER_PASSWORD: admin
+    OPENNOTIFICATIES_SUPERUSER_EMAIL: admin@localhost
+    RUN_SETUP_CONFIG: "true"
+    NOTIFICATION_SEC_INTERVAL: "5"
+
+  objecttypen:
+    UWSGI_PROCESSES: "1"
+    UWSGI_THREADS: "2"
+    DJANGO_SETTINGS_MODULE: objecttypes.conf.docker
+    SECRET_KEY: dev-only-not-for-production
+    DB_HOST: objecttypen-db
+    DB_NAME: objecttypes
+    DB_USER: objecttypes
+    DB_PASSWORD: objecttypes
+    ALLOWED_HOSTS: "*"
+    CACHE_DEFAULT: objecttypen-redis:6379/0
+    CACHE_AXES: objecttypen-redis:6379/0
+    DISABLE_2FA: "true"
+    OTEL_SDK_DISABLED: "true"
+    RUN_SETUP_CONFIG: "true"
+
+  objecten:
+    UWSGI_PROCESSES: "1"
+    UWSGI_THREADS: "2"
+    DJANGO_SETTINGS_MODULE: objects.conf.docker
+    SECRET_KEY: dev-only-not-for-production
+    DB_HOST: objecten-db
+    DB_NAME: objects
+    DB_USER: objects
+    DB_PASSWORD: objects
+    ALLOWED_HOSTS: "*"
+    CACHE_DEFAULT: objecten-redis:6379/0
+    CACHE_AXES: objecten-redis:6379/0
+    DISABLE_2FA: "true"
+    OTEL_SDK_DISABLED: "true"
+    CELERY_BROKER_URL: redis://objecten-redis:6379/1
+    CELERY_RESULT_BACKEND: redis://objecten-redis:6379/1
+    NOTIFICATIONS_DISABLED: "false"
+    RUN_SETUP_CONFIG: "true"
+
+  # Traces for the .NET services. Always set, like compose: the exporter fails
+  # harmlessly when Tempo is absent (services/*/Program.cs).
+  otel:
+    OTEL_EXPORTER_OTLP_ENDPOINT: http://tempo:4317
+    OTEL_EXPORTER_OTLP_PROTOCOL: grpc
+
+# ── Workloads ──────────────────────────────────────────────────────────────────
+# Per entry: image | own (built here) · args · envFrom (env groups) · env
+# ports · probe (a literal readinessProbe) · files (ConfigMap mounts) · data
+# (a database volume) · waitFor (host:port to wait for) · job · enabled
+#
+# `args` (never `command`) is the compose `command:` equivalent: compose replaces
+# the image's CMD, and so does Kubernetes' `args` — Kubernetes' `command` would
+# replace the ENTRYPOINT instead. The chart fails to render if you use `command`.
+workloads:
+
+  # ── OpenZaak (S-01) ─────────────────────────────────────────────────────────
+  oz-db:
+    image: docker.io/postgis/postgis:17-3.5
+    args: [postgres, -c, max_connections=300]
+    env:
+      POSTGRES_USER: openzaak
+      POSTGRES_PASSWORD: openzaak
+      POSTGRES_DB: openzaak
+    ports: [{ name: postgres, port: 5432 }]
+    data: { mountPath: /var/lib/postgresql/data, size: 4Gi }
+    probe:
+      exec:
+        command: [sh, -c, "pg_isready -U openzaak -d openzaak && psql -U openzaak -d openzaak -c 'SELECT PostGIS_Version();' -q"]
+      periodSeconds: 5
+
+  oz-redis:
+    image: docker.io/library/redis:7
+    ports: [{ name: redis, port: 6379 }]
+    probe: { tcpSocket: { port: 6379 } }
+  openzaak:
+    image: docker.io/openzaak/open-zaak:1.28.2
+    # setup_configuration first, then the server — in ONE container, on purpose.
+    # Both /setup_configuration.sh and /start.sh run `manage.py migrate`, so a
+    # separate init Job (as compose has, ordered by depends_on) races this pod for
+    # the same database and Django fails with "relation already exists".
+    args: [sh, -c, "/setup_configuration.sh && exec /start.sh"]
+    envFrom: [oz]
+    ports: [{ name: http, port: 8000 }]
+    # /admin/ answers 302 when Django is up — a redirect counts as ready.
+    probe:
+      httpGet: { path: /admin/, port: 8000 }
+      initialDelaySeconds: 30
+      periodSeconds: 10
+      failureThreshold: 30
+    files: [{ configMap: rr-oz-config, mountPath: /app/setup_configuration }]
+    waitFor: [oz-db:5432, oz-redis:6379]
+
+  oz-celery:
+    image: docker.io/openzaak/open-zaak:1.28.2
+    args: [/celery_worker.sh]
+    envFrom: [oz]
+    waitFor: [oz-db:5432, oz-redis:6379]
+
+  # ── Open Notificaties / NRC (S-01-c) ────────────────────────────────────────
+  nrc-db:
+    image: docker.io/postgis/postgis:17-3.5
+    args: [postgres, -c, max_connections=300]
+    env:
+      POSTGRES_USER: opennotificaties
+      POSTGRES_PASSWORD: opennotificaties
+      POSTGRES_DB: opennotificaties
+    ports: [{ name: postgres, port: 5432 }]
+    data: { mountPath: /var/lib/postgresql/data, size: 2Gi }
+    probe:
+      exec: { command: [pg_isready, -U, opennotificaties, -d, opennotificaties] }
+      periodSeconds: 5
+
+  nrc-redis:
+    image: docker.io/library/redis:7
+    ports: [{ name: redis, port: 6379 }]
+    probe: { tcpSocket: { port: 6379 } }
+  nrc-web:
+    image: docker.io/openzaak/open-notificaties:1.16.1
+    # setup_configuration first, then the server — in ONE container, on purpose.
+    # Both /setup_configuration.sh and /start.sh run `manage.py migrate`, so a
+    # separate init Job (as compose has, ordered by depends_on) races this pod for
+    # the same database and Django fails with "relation already exists".
+    args: [sh, -c, "/setup_configuration.sh && exec /start.sh"]
+    envFrom: [nrc]
+    ports: [{ name: http, port: 8000 }]
+    probe:
+      httpGet: { path: /admin/, port: 8000 }
+      initialDelaySeconds: 30
+      periodSeconds: 10
+      failureThreshold: 30
+    files: [{ configMap: rr-nrc-config, mountPath: /app/setup_configuration }]
+    waitFor: [nrc-db:5432, nrc-redis:6379, openzaak:8000]
+
+  nrc-celery:
+    image: docker.io/openzaak/open-notificaties:1.16.1
+    args: [/celery_worker.sh]
+    envFrom: [nrc]
+    waitFor: [nrc-db:5432, nrc-redis:6379]
+
+  # Without beat, notifications are accepted but never delivered (ADR-0007).
+  nrc-beat:
+    image: docker.io/openzaak/open-notificaties:1.16.1
+    args: [/celery_beat.sh]
+    envFrom: [nrc]
+    waitFor: [nrc-db:5432, nrc-redis:6379]
+
+  # ── Keycloak (S-02) ─────────────────────────────────────────────────────────
+  keycloak:
+    image: quay.io/keycloak/keycloak:26.1
+    args: [start-dev, --import-realm]
+    env:
+      KC_BOOTSTRAP_ADMIN_USERNAME: admin
+      KC_BOOTSTRAP_ADMIN_PASSWORD: admin
+      KEYCLOAK_ADMIN: admin
+      KEYCLOAK_ADMIN_PASSWORD: admin
+      KC_HEALTH_ENABLED: "true"
+      KC_HTTP_ENABLED: "true"
+      # Pin the issuer to the address the browser uses, and let backchannel calls
+      # keep using keycloak:8080 — the BFF discovers metadata in-cluster and gets
+      # this issuer back, which is what browser tokens carry (infra/host-browser.yml).
+      KC_HOSTNAME: "http://{{ .Values.host }}:{{ index .Values.nodePorts \"keycloak\" }}"
+      KC_HOSTNAME_BACKCHANNEL_DYNAMIC: "true"
+    ports: [{ name: http, port: 8080 }]
+    # TCP, not /health/ready on the management port: nothing here gates on realm
+    # import, and a wrong health path would leave the Service with no endpoints.
+    probe: { tcpSocket: { port: 8080 }, initialDelaySeconds: 15 }
+    files: [{ configMap: rr-kc-realms, mountPath: /opt/keycloak/data/import }]
+
+  # ── Flowable (S-03) ─────────────────────────────────────────────────────────
+  flowable-db:
+    image: docker.io/library/postgres:16
+    env:
+      POSTGRES_USER: flowable
+      POSTGRES_PASSWORD: flowable
+      POSTGRES_DB: flowable
+    ports: [{ name: postgres, port: 5432 }]
+    data: { mountPath: /var/lib/postgresql/data, size: 2Gi }
+    probe:
+      exec: { command: [pg_isready, -U, flowable, -d, flowable] }
+      periodSeconds: 5
+
+  flowable-rest:
+    image: docker.io/flowable/flowable-rest:latest
+    env:
+      SPRING_DATASOURCE_DRIVER-CLASS-NAME: org.postgresql.Driver
+      SPRING_DATASOURCE_URL: jdbc:postgresql://flowable-db:5432/flowable
+      SPRING_DATASOURCE_USERNAME: flowable
+      SPRING_DATASOURCE_PASSWORD: flowable
+    ports: [{ name: http, port: 8080 }]
+    # Every REST path needs basic auth, so an httpGet probe would read 401 as
+    # not-ready. TCP is the honest signal here.
+    probe: { tcpSocket: { port: 8080 }, initialDelaySeconds: 20 }
+    waitFor: [flowable-db:5432]
+
+  # Deploys the BPMN to the process engine and the DMN to the DMN engine as two
+  # separate deployments — flowable-rest does not cascade one into the other
+  # (S-13, ADR-0016). Idempotent.
+  flowable-init:
+    job: true
+    image: docker.io/curlimages/curl:latest
+    args:
+      - sh
+      - -c
+      - |
+        svc=http://flowable-rest:8080/flowable-rest/service/repository/deployments
+        dmn=http://flowable-rest:8080/flowable-rest/dmn-api/dmn-repository/deployments
+        until curl -sf -u rest-admin:test "$svc" >/dev/null 2>&1; do echo "waiting for flowable-rest..."; sleep 3; done
+        if curl -s -u rest-admin:test "$dmn" | grep -q '"name":"diploma-eligibility.dmn"'; then
+          echo "diploma-eligibility DMN already deployed; skip"
+        else
+          curl -sf -u rest-admin:test -F 'file=@/work/diploma-eligibility.dmn;filename=diploma-eligibility.dmn' "$dmn" >/dev/null && echo "deployed diploma-eligibility DMN"
+        fi
+        if curl -s -u rest-admin:test "$svc?name=registratie" | grep -q '"name":"registratie"'; then
+          echo "registratie BPMN already deployed; skip"
+        else
+          curl -sf -u rest-admin:test -F 'file=@/work/registratie.bpmn;filename=registratie.bpmn' "$svc" >/dev/null && echo "deployed registratie BPMN"
+        fi
+    files: [{ configMap: rr-fl-bpmn, mountPath: /work }]
+    waitFor: [flowable-rest:8080]
+
+  # ── ACL ─────────────────────────────────────────────────────────────────────
+  acl:
+    own: true
+    envFrom: [otel]
+    env:
+      OTEL_SERVICE_NAME: acl
+      # The FQDN, not `openzaak`: OpenZaak rejects a single-label host on
+      # zaak-create. It must be the same host the zaaktype was seeded through
+      # (see the seed-zaaktype job) so the URLs stay host-consistent (ADR-0009).
+      Acl__OpenZaak__BaseUrl: "http://openzaak.{{ .Release.Namespace }}.svc.cluster.local:8000/"
+      Acl__OpenZaak__ClientId: big-reference-seed
+      Acl__OpenZaak__Secret: insecure-dev-secret-change-me
+      Acl__Defaults__Bronorganisatie: "517439943"
+      Acl__Defaults__VerantwoordelijkeOrganisatie: "517439943"
+      Acl__Defaults__Vertrouwelijkheidaanduiding: openbaar
+      Acl__Defaults__ZaaktypeIdentificatie: BIG-REGISTRATIE
+      Acl__Defaults__InformatieobjecttypeOmschrijving: Diploma
+      # Objecten reflects the request Host into the object url it returns, and
+      # publishes that url to NRC — which rejects a single-label host. The FQDN
+      # replaces compose's `objecten.local` alias (ADR-0029).
+      Acl__Objecten__BaseUrl: "http://objecten.{{ .Release.Namespace }}.svc.cluster.local:8000/"
+      Acl__Objecten__Token: 1234567890abcdef1234567890abcdef12345678
+      # Short name on purpose: Objecten only accepts an objecttype URL that
+      # matches the one it was configured with (infra/objecten/setup_configuration
+      # /data.yaml → http://objecttypen:8000/api/v2/).
+      Acl__Objecten__ObjecttypenBaseUrl: http://objecttypen:8000/
+      Acl__Objecten__ObjecttypenToken: 0123456789abcdef0123456789abcdef01234567
+      Acl__Objecten__ObjecttypeName: RegisterRecord
+    ports: [{ name: http, port: 8080 }]
+    probe: { httpGet: { path: /health, port: 8080 }, periodSeconds: 5 }
+
+  # ── BIG Domain Service (S-05) ───────────────────────────────────────────────
+  domain:
+    own: true
+    envFrom: [otel]
+    env:
+      OTEL_SERVICE_NAME: domain
+      Flowable__BaseUrl: http://flowable-rest:8080/flowable-rest/
+      Flowable__Username: rest-admin
+      Flowable__Password: test
+      Acl__BaseUrl: http://acl:8080/
+    ports: [{ name: http, port: 8080 }]
+    probe: { httpGet: { path: /health, port: 8080 }, periodSeconds: 5 }
+
+  # ── BFF ─────────────────────────────────────────────────────────────────────
+  bff:
+    own: true
+    envFrom: [otel]
+    env:
+      OTEL_SERVICE_NAME: bff
+      # In-cluster authority: Keycloak's discovery document returns the pinned
+      # KC_HOSTNAME issuer, which is what browser tokens carry (ADR-0010).
+      Keycloak__Authority: http://keycloak:8080/realms/digid
+      Keycloak__MedewerkerAuthority: http://keycloak:8080/realms/medewerker
+      Downstream__Domain__BaseUrl: http://domain:8080/
+      Downstream__Projection__BaseUrl: http://projection-api:8080/
+      Downstream__Acl__BaseUrl: http://acl:8080/
+    ports: [{ name: http, port: 8080 }]
+    probe: { httpGet: { path: /health, port: 8080 }, periodSeconds: 5 }
+
+  # ── Read projection (S-06) ──────────────────────────────────────────────────
+  projection-db:
+    image: docker.io/library/postgres:16
+    env:
+      POSTGRES_USER: projection
+      POSTGRES_PASSWORD: projection
+      POSTGRES_DB: projection
+    ports: [{ name: postgres, port: 5432 }]
+    data: { mountPath: /var/lib/postgresql/data, size: 2Gi }
+    probe:
+      exec: { command: [pg_isready, -U, projection, -d, projection] }
+      periodSeconds: 5
+
+  event-subscriber:
+    own: true
+    envFrom: [otel]
+    env:
+      OTEL_SERVICE_NAME: event-subscriber
+      ConnectionStrings__Projection: Host=projection-db;Database=projection;Username=projection;Password=projection
+      Acl__BaseUrl: http://acl:8080/
+      EventSubscriber__Webhook__AuthToken: Bearer big-reference-notifications
+    ports: [{ name: http, port: 8080 }]
+    probe: { httpGet: { path: /health, port: 8080 }, periodSeconds: 5 }
+    # It migrates the projection schema on start and throws if the DB is absent.
+    waitFor: [projection-db:5432]
+
+  projection-api:
+    own: true
+    envFrom: [otel]
+    env:
+      OTEL_SERVICE_NAME: projection-api
+      ConnectionStrings__Projection: Host=projection-db;Database=projection;Username=projection;Password=projection
+    ports: [{ name: http, port: 8080 }]
+    probe: { httpGet: { path: /health, port: 8080 }, periodSeconds: 5 }
+    waitFor: [projection-db:5432]
+
+  # ── Portals (S-08/S-09/S-12/S-15) ───────────────────────────────────────────
+  # Caddy serves the Angular app and reverse-proxies its endpoint group to
+  # http://bff:8080 — hence the Service must stay named `bff`. Caddy resolves that
+  # name through the system resolver, so the DNS search domains apply and no
+  # upstream rewriting is needed here (ADR-0034).
+  self-service:
+    own: true
+    ports: [{ name: http, port: 80 }]
+    probe: { httpGet: { path: /, port: 80 }, periodSeconds: 5 }
+    files:
+      - configMap: portal-config-digid
+        mountPath: /usr/share/caddy/config.json
+        subPath: config.json
+
+  openbaar:
+    own: true
+    ports: [{ name: http, port: 80 }]
+    probe: { httpGet: { path: /, port: 80 }, periodSeconds: 5 }
+
+  behandel:
+    own: true
+    ports: [{ name: http, port: 80 }]
+    probe: { httpGet: { path: /, port: 80 }, periodSeconds: 5 }
+    files:
+      - configMap: portal-config-medewerker
+        mountPath: /usr/share/caddy/config.json
+        subPath: config.json
+
+  beheer:
+    own: true
+    ports: [{ name: http, port: 80 }]
+    probe: { httpGet: { path: /, port: 80 }, periodSeconds: 5 }
+    files:
+      - configMap: portal-config-medewerker
+        mountPath: /usr/share/caddy/config.json
+        subPath: config.json
+
+  # ── Objecttypen API (S-18a) ─────────────────────────────────────────────────
+  objecttypen-db:
+    image: docker.io/library/postgres:17-alpine
+    env:
+      POSTGRES_USER: objecttypes
+      POSTGRES_PASSWORD: objecttypes
+      POSTGRES_DB: objecttypes
+    ports: [{ name: postgres, port: 5432 }]
+    data: { mountPath: /var/lib/postgresql/data, size: 2Gi }
+    probe:
+      exec: { command: [pg_isready, -U, objecttypes] }
+      periodSeconds: 5
+
+  objecttypen-redis:
+    image: docker.io/library/redis:7
+    ports: [{ name: redis, port: 6379 }]
+    probe: { tcpSocket: { port: 6379 } }
+  objecttypen:
+    image: docker.io/maykinmedia/objecttypes-api:3.4.2
+    # setup_configuration first, then the server — in ONE container, on purpose.
+    # Both /setup_configuration.sh and /start.sh run `manage.py migrate`, so a
+    # separate init Job (as compose has, ordered by depends_on) races this pod for
+    # the same database and Django fails with "relation already exists".
+    args: [sh, -c, "/setup_configuration.sh && exec /start.sh"]
+    envFrom: [objecttypen]
+    ports: [{ name: http, port: 8000 }]
+    probe:
+      httpGet: { path: /admin/, port: 8000 }
+      initialDelaySeconds: 30
+      periodSeconds: 10
+      failureThreshold: 30
+    files: [{ configMap: rr-objecttypen-config, mountPath: /app/setup_configuration }]
+    waitFor: [objecttypen-db:5432, objecttypen-redis:6379]
+
+  # The RegisterRecord objecttype + published version, over the API (S-18c,
+  # ADR-0020/ADR-0027). The uuid is pinned — Objecten identifies it by uuid.
+  registerrecord-init:
+    job: true
+    image: docker.io/library/python:3-slim
+    args: [python, /config/register.py]
+    env:
+      OBJECTTYPEN: http://objecttypen:8000
+      OBJECTTYPEN_TOKEN: 0123456789abcdef0123456789abcdef01234567
+      SCHEMA: /config/registerrecord.schema.json
+    files: [{ configMap: rr-registerrecord-config, mountPath: /config }]
+    waitFor: [objecttypen:8000]
+
+  # ── Objecten API (S-18b) ────────────────────────────────────────────────────
+  objecten-db:
+    image: docker.io/postgis/postgis:17-3.5
+    env:
+      POSTGRES_USER: objects
+      POSTGRES_PASSWORD: objects
+      POSTGRES_DB: objects
+    ports: [{ name: postgres, port: 5432 }]
+    data: { mountPath: /var/lib/postgresql/data, size: 2Gi }
+    probe:
+      exec: { command: [pg_isready, -U, objects] }
+      periodSeconds: 5
+
+  objecten-redis:
+    image: docker.io/library/redis:7
+    ports: [{ name: redis, port: 6379 }]
+    probe: { tcpSocket: { port: 6379 } }
+  objecten:
+    image: docker.io/maykinmedia/objects-api:3.4.0
+    # setup_configuration first, then the server — in ONE container, on purpose.
+    # Both /setup_configuration.sh and /start.sh run `manage.py migrate`, so a
+    # separate init Job (as compose has, ordered by depends_on) races this pod for
+    # the same database and Django fails with "relation already exists".
+    args: [sh, -c, "/setup_configuration.sh && exec /start.sh"]
+    envFrom: [objecten]
+    ports: [{ name: http, port: 8000 }]
+    probe:
+      httpGet: { path: /admin/, port: 8000 }
+      initialDelaySeconds: 30
+      periodSeconds: 10
+      failureThreshold: 30
+    files: [{ configMap: rr-objecten-config, mountPath: /app/setup_configuration }]
+    waitFor: [objecten-db:5432, objecten-redis:6379, objecttypen:8000]
+
+  # Delivers Objecten's notifications to NRC; without it every register write is
+  # silently undelivered (ADR-0029).
+  objecten-celery:
+    image: docker.io/maykinmedia/objects-api:3.4.0
+    args: [/celery_worker.sh]
+    envFrom: [objecten]
+    waitFor: [objecten-db:5432, objecten-redis:6379]
+
+  # ── Bootstrap the flow, like the local compose stack does (S-B04, ADR-0020) ──
+  # Seeds + publishes the BIG zaaktype through the same FQDN the ACL uses, so the
+  # server-assigned URLs are host-consistent. The ACL then resolves them by
+  # identificatie (S-27, ADR-0021) — nothing is injected back.
+  # Publishing validates the resultaattype against the external Selectielijst
+  # API, so the node needs outbound internet for this one job (ADR-0006).
+  seed-zaaktype:
+    job: true
+    image: docker.io/library/python:3-slim
+    args: [python, /seed/seed_catalogus.py]
+    env:
+      OZ_BASE: "http://openzaak.{{ .Release.Namespace }}.svc.cluster.local:8000"
+      OZ_PUBLISH: "1"
+    files: [{ configMap: rr-seed-scripts, mountPath: /seed }]
+    waitFor: [openzaak:8000]
+
+  # Registers the NRC abonnement on the `objecten` kanaal pointing at the
+  # event-subscriber, so register writes reach the projection (ADR-0030).
+  # Without it the openbaar register stays empty. Restart-safe and idempotent.
+  nrc-subscribe:
+    job: true
+    image: docker.io/library/python:3-slim
+    args: [python, /seed/register-abonnement.py]
+    env:
+      NRC_BASE: http://nrc-web:8000
+      # The script resolves this to an address for the callback URL; the FQDN
+      # resolves to the Service's (stable) ClusterIP, which NRC's URLValidator
+      # accepts — the compose stack uses the container IP for the same reason.
+      SINK_HOST: "event-subscriber.{{ .Release.Namespace }}.svc.cluster.local"
+      SINK_PORT: "8080"
+      SINK_AUTH: Bearer big-reference-notifications
+    files: [{ configMap: rr-seed-scripts, mountPath: /seed }]
+    waitFor: [nrc-web:8000, event-subscriber:8080]
+
+  # ── Observability backplane (S-16a, ADR-0023) ───────────────────────────────
+  # Off by default: these are built images too (config baked in), so switching
+  # them on also means pushing three more images. Enable all three together.
+  tempo:
+    enabled: false
+    own: true
+    args: ["-config.file=/etc/tempo.yaml"]
+    ports: [{ name: otlp, port: 4317 }, { name: http, port: 3200 }]
+
+  prometheus:
+    enabled: false
+    own: true
+    ports: [{ name: http, port: 9090 }]
+
+  grafana:
+    enabled: false
+    own: true
+    env:
+      GF_SECURITY_ADMIN_USER: admin
+      GF_SECURITY_ADMIN_PASSWORD: admin
+      GF_AUTH_ANONYMOUS_ENABLED: "true"
+    ports: [{ name: http, port: 3000 }]

infra/helm/registry.yaml

@@ -0,0 +1,60 @@
+# Throwaway in-cluster OCI registry, published on NodePort 30500.
+#
+# Talos has no Docker daemon and no way to side-load an image, so the images built
+# from this repo must come from a registry. This one lives *inside* the cluster on
+# purpose: a registry on the laptop needs an inbound port opened on firewalld's
+# libvirt zone (root), while pushing from the laptop to the node is outbound and
+# always allowed. The node then pulls from its own NodePort.
+#
+# Talos must be told it speaks plain HTTP — see the machine.registries.mirrors
+# patch in docs/runbooks/kubernetes-talos.md. Storage is emptyDir: if this pod is
+# replaced, re-run `make k8s-images`.
+apiVersion: v1
+kind: Namespace
+metadata:
+  name: registry
+---
+apiVersion: apps/v1
+kind: Deployment
+metadata:
+  name: registry
+  namespace: registry
+spec:
+  replicas: 1
+  strategy: { type: Recreate }
+  selector:
+    matchLabels: { app: registry }
+  template:
+    metadata:
+      labels: { app: registry }
+    spec:
+      containers:
+        - name: registry
+          image: docker.io/library/registry:2
+          env:
+            - name: REGISTRY_STORAGE_DELETE_ENABLED
+              value: "true"
+          ports:
+            - containerPort: 5000
+          readinessProbe:
+            httpGet: { path: /v2/, port: 5000 }
+          volumeMounts:
+            - name: data
+              mountPath: /var/lib/registry
+      volumes:
+        - name: data
+          emptyDir: {}
+---
+apiVersion: v1
+kind: Service
+metadata:
+  name: registry
+  namespace: registry
+spec:
+  type: NodePort
+  selector: { app: registry }
+  ports:
+    - name: http
+      port: 5000
+      targetPort: 5000
+      nodePort: 30500

infra/helm/seed-configmaps.sh

@@ -0,0 +1,46 @@
+#!/usr/bin/env bash
+#
+# Turn the repo's config inputs into the ConfigMaps the Helm chart mounts.
+#
+# This is the Kubernetes sibling of infra/seed-config.sh: the upstream Common
+# Ground images are used verbatim and read their config from a mounted directory,
+# so the config has to be handed to the platform out-of-band. Compose gets it via
+# `docker cp` into external volumes; Kubernetes gets it as ConfigMaps created from
+# the files that already live in this repo. Copying those files into the chart
+# would fork them from the compose stack, so we don't.
+#
+# Idempotent: re-run after editing any data.yaml, then `make k8s-reseed`.
+#
+# Usage: seed-configmaps.sh [namespace]      (default: big)
+set -euo pipefail
+
+ns="${1:-big}"
+here="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
+repo="$(cd "$here/../.." && pwd)"
+
+kubectl get namespace "$ns" >/dev/null 2>&1 || kubectl create namespace "$ns"
+
+seed() {  # name  <kubectl --from-file args...>
+  local name="$1"; shift
+  kubectl create configmap "$name" -n "$ns" "$@" \
+    --dry-run=client -o yaml | kubectl apply -f - >/dev/null
+  echo "  seeded configmap/$name"
+}
+
+seed rr-oz-config            --from-file="$repo/infra/openzaak/setup_configuration/"
+seed rr-nrc-config           --from-file="$repo/infra/opennotificaties/setup_configuration/"
+seed rr-kc-realms            --from-file="$repo/infra/keycloak/realms/"
+seed rr-objecttypen-config   --from-file="$repo/infra/objecttypen/setup_configuration/"
+seed rr-objecten-config      --from-file="$repo/infra/objecten/setup_configuration/"
+# register.py + the RegisterRecord JSON schema (the __pycache__ dir is skipped:
+# kubectl only takes regular files from a --from-file directory).
+seed rr-registerrecord-config --from-file="$repo/infra/objecttypen-registerrecord/"
+# The BPMN and the DMN are two separate Flowable deployments (S-13, ADR-0016).
+seed rr-fl-bpmn \
+  --from-file="$repo/workflows/registratie.bpmn" \
+  --from-file="$repo/workflows/diploma-eligibility.dmn"
+# The two bootstrap scripts the compose local stack runs as init containers
+# (S-B04, ADR-0020). Stdlib-only, so a plain python image can run them.
+seed rr-seed-scripts \
+  --from-file="$repo/infra/openzaak/seed_catalogus.py" \
+  --from-file="$repo/infra/local/register-abonnement.py"